TB40 Belt Conveyor

Power and intelligence in a small package – a belt conveyor that meets even the highest demands.

Height IconLow Profile: 80 mm
Motor IconIntegrated Motor: 24 V BLDC
Drive Variants IconMultiple Drive Variants
Control IconOptimal Control
Connection IconVarious Connection Options

Powerful 24 V BLDC motor with integrated speed and positioning control

The centerpiece of the TB40 belt conveyor is an energy-efficient drive with high power density for conveying loads up to 200 kg. With 24 V, it is in the protective extra-low voltage range, so it presents no danger to humans or animals. This simplifies compliance with country-specific regulations and promotes global use.

In the basic version, there are three selectable fixed speeds. They can be accessed via digital inputs. Alternatively, a stepless conveying speed can be set via the analog setpoint. If desired, we can also prepare the drive for position control. Use of the trailing function offers additional flexibility to adapt the start-up and braking ramps.

Space-saving design thanks to patented drive concept – installation height of just 80 mm

By integrating the motor into the drive roller with a diameter of only 78 mm, the TB40 belt conveyor requires considerably less space. The compact design with a height of just 80 mm combined with the efficient 24 V drive enables a wide range of applications.

Great operational reliability and variable alignment of the connection cables

The motor connection runs parallel to the TB40 belt conveyor and is protected by an impact-resistant housing, which reduces the risk of damage due to collision and thus increases operational safety. You select whether the motor connection should be located on the right or left side of the belt conveyor. The orientation of the connection is variable and can be changed retrospectively with a few simple steps for a flexible supply of the connection cables.

MonTouch parameterization unit for more flexibility

Do the operating conditions of your belt conveyor change frequently? You can easily and flexibly adapt the drive data set on-site with the MonTouch parameterization unit as an accessory for the TB40 belt conveyor.

A wide range of accessories to suit your individual requirements

Complement your TB40 belt conveyor with our extensive line of accessories. These range from various side guides to stable substructures. We also offer a selection of proven belt conveyors for a wide range of applications. Do you need a special solution? No problem – we will be happy to advise you and find exactly the right type of belt for your requirements.

Delivery time (subject to intermediate sale): 10-15 working days
Details
Chassis widths 300, 400, 500, 600, 700, 800 mm
Drive integrated into the drive roller
Drive Variants 50 kg (10 - 45 m/min); 80 kg (1 - 33,5 m/min); 200 kg (0,25 - 12 m/min)
Motor 24 V BLDC motor
Speed 0.25 – 45.0 m/min (±10%)
Max. belt load when conveying up to 200 kg (80 kg/m)
Connection Options 0°, 90°, 180°, 270°
Warranty 3 years
Downloads