TB30 Tandem Conveyor

The TB30 tandem conveyor in tandem configuration is ideal for the transport of larger pallets and other dimensionally stable, bulky products. The width and the position of the support surfaces are customized to achieve the optimal contact area for the product. The two conveyor chassis are connected by an elastomer coupling and are driven cost-efficiently with a single motor.

The chassis widths, and the gap between them are application-specific – up to a maximum width of 3.28 ft. The modular design featuring standardized components make the TB30 tandem conveyor a versatile choice. The conveyor length and the distance between belts are manufactured to customer specifications. Power transmission to the belt is highly efficient, and without slip. When operating with higher loads, and especially with product accumulation, the chassis requires the sliding plate insert.

As compared to customary asynchronous geared motors, you can save electricity and money. If the TB30 conveyor is used in 3-shift operation for a whole year without interruption, you will save 512 kWh electricity and approximately 235 USD.

A variety of standard chassis widths and drive configurations, as well as a wide range of accessories such as side guides and floor stands are readily available.

The TB30 conveyor is available in standard widths ranging from 2.36 to 9.84 in, and a maximum length of 32.8 ft. It is available as a single-belt or double-belt configuration. A tandem chassis version, driven by a single motor, is also available for the transport of larger pallets and other dimensionally stable products.

The TB30 tandem conveyor excels in enhancing productivity with its remarkable flexibility, enabling efficient transport of larger pallets and dimensionally stable products while providing customizable support surfaces and adjustable chassis widths. Montech’s belt conveyors provide a reliable and efficient solution for transporting goods in various industries.

Delivery time (subject to intermediate sale): 10-15 working days
Conveyor widths 2.36", 3.15", 4.13", 5.51", 7.28", 9.84"
Drive mode end drive (front and rear drive), center drive
Motor Brushless DC motor preferably for variable speeds
three-phase asynchronous motor for fixed speeds
Power supply DC motor 1x200-240V/3x200-240V,50/60Hz or 1x100-120V, 50/60Hz
Power supply AC motor 3x380-420V/50Hz or 3x440-480V/60Hz
DC motor with controller (infinitely variable) up to 262.5 fpm
AC motor (fixed speed) up to 98.4 fpm
Load in conveying mode up to 220.5 lbs
Protection class DC motor IP65 (controller IP20)
Protection class AC motor IP44
Warranty 3 years